$ 10.88

• 6'' grippy scrub
• Stiff polyester
• Solid polypropylene block
• Comfortable gripped handle
• May be autoclaved at 273F/134C
• Blue, green, red, white or yellow
• Bagged and bar coded
• Six per case

This tough scrub is comfortable to hold, and is designed for applying maximum pressure. It has a chisel edge at the back of the handle for shifting stuck-on soil. The product is made with a solid polypropylene block, which is shock, distortion and crack resistant, and unlike 'structural foam' polypropylene is not brittle or easily chipped. Its surfaces are smooth and easily cleaned. And it is non absorbent and rot proof. Polyester filaments have a high melt point, low water absorption factor, excellent tensile strength and very good sweeping characteristics. They will last many times longer, and clean far better, than standard polypropylene filaments. This product may be autoclaved at 273F/134C, or cleaned using standard cleaning agents, disinfectants and sanitizers. See also ST5 and ST10. There is no resin set version. If you can't find the product you want on this site see the following at www.hillbrush.com: ST7, ST9.