$ 20.42

• 12'' counter brush resin set
• Medium soft 6
• Solid polypropylene block
• Resin Set
• May be autoclaved at 273F/134C
• Blue, green, red, white or yellow
• Bagged and bar coded
• Six per case

This cranked handle counter brush is comfortable to hold, keeps the user's hands away from the work surface and allows far greater control. It has an integral hanging hole. The product is made with a solid polypropylene block, which is shock, distortion and crack resistant, and unlike 'structural foam' polypropylene is not brittle or easily chipped. Its surfaces are smooth and easily cleaned. And it is non absorbent and rot proof. Polyester filaments have a high melt point, low water absorption factor, excellent tensile strength and very good sweeping characteristics. They will last many times longer than standard polypropylene filaments. In a resin set brush, the tufts are secured with stainless steel staples AND epoxy resin. This locks the filaments in, and makes the chance of a strand pulling out extremely remote, as well as effectively inhibiting the accumulation of any soil or moisture in the tuft holes. Resin set brushes are usually recommended for areas of particular hygienic sensitivity. This product may be autoclaved at 273F/134C, or cleaned using standard cleaning agents, disinfectants and sanitizers. See B861RES for a resin set version. See DP3 for accompanying dust pan. There is a version of B861 with stiffer material (B862), with anti microbial additive (AMB861), and with black polyester filaments (B861BLK). Other types of bench brush (B976, B1478, D70P, D71P and D75P) are also available. See www.hillbrush.com.